today, Huai'an Crane Rental Company Introduce the details of overhead crane operation!

1. Carefully check whether the mechanical equipment, appliances, ropes, seat plates and safety belts are damaged before work.

2. The operation rope and safety rope shall be rooted separately and tied tightly. Soft objects shall be padded at the edge to prevent the rope from breaking due to wear. The lower end of the rope shall contact the ground. The rope laying person shall also tie a temporary safety rope.

3. The construction personnel shall wear work clothes and safety helmets before going on duty, fasten the safety belt before going on duty, fasten the safety lock (on the safety rope), fasten the shackle (on the operation rope), and fasten the seat buckle firmly.

4. The person in charge of construction and the supervisor upstairs shall give command and help when lowering the rope.

5. Ice, snow and soil on cliffs, steep slopes or sidewalks should be cleaned frequently, and 1m high railings must be set outside. A side board or earth ridge with a height of 18 cm shall be set inside the railing to prevent falling objects from hurting people.

6. Use safety belts or take other safety measures when working on scaffolds without scaffolds or railings and with a height of more than 1.5 meters.

7. The safety belt shall be checked before use, and the static load test shall be carried out regularly (every 6 months). The test load is 225kg, and the test time is 5 minutes. After the test, check whether there is deformation, fracture, etc., and make test records. Unqualified safety belts shall be handled in time.

8. The hook or rope of the safety belt shall be hung on the firm component or the steel wire rope used for the safety belt. It is forbidden to hang on moving or unstable objects.

9. Tool bags shall be used for work at heights. Large tools shall be tied to solid parts with ropes and shall not be placed randomly to avoid accidents caused by falling from high altitude.

10. When working at heights, other people are not allowed to walk or stay below the workplace. Fences or other protective devices shall be set up in the workplace to prevent falling objects from hurting people. For example, when working on a lattice platform, to prevent tools and equipment from falling, planks should be paved.

The above is Huai'an Crane Leasing Company I hope the relevant content introduced to you will be helpful. If you want to know more about the leasing of construction machinery, you can contact our company directly, and look forward to your call!