The unevenness of the stability during the lifting process plays a very important role in the safety of construction personnel and construction equipment. How can the safety and stability of hoisting equipment be ensured during construction? Here, according to Huai'an Crane Rental Company Years of experience in hoisting construction tell us that as long as the support is increased, the equipment can be balanced to maintain stability. The specific operation methods are as follows:

At the top of the list, the supporting area of the equipment should be as large as possible. It is required that the center of the type equipment should be as low as possible when arranging the equipment, so that the stability will be higher. As for the operation of picking up a heavy car, the first thing to do is to lay the outriggers, which means that the supporting area will be increased, and the moment of overturning will also be reduced, so that the stability of the handling operation will be greatly advanced.

Second, try to lower the center of the equipment and increase the weight at the bottom of the equipment. For example, when carrying some component products, it is necessary to place the heavier side or the larger side of the component below, so as to lower the center of the load and increase the weight of the bottom.

Third, the lifting point should be in a straight line with the center of gravity of the lifting Wuping. By doing this, we can reach the time of lifting the objects, and avoid tilting, swaying or overturning of the lifted objects during lifting or handling, which will also reach the goal of stable lifting. Moreover, such construction operations will also reduce the occurrence of safety accidents as much as possible.