Equipment displacement Operation refers to the operation of moving a device from one place to another. This movement may be due to the need to maintain the equipment or change the location of the equipment. Whatever the reason, equipment displacement is an operation that needs attention, because wrong displacement may lead to equipment damage, personal injury and even accidents. below Huai'an equipment displacement The precautions for equipment shifting operation will be introduced from the aspects of equipment shifting safety, operation process, equipment inspection, etc.
Safety of equipment displacement
First, the equipment shifting operation needs to ensure safety. There is a high risk of equipment movement, so it is necessary to follow certain safety requirements:
Determine the scope of work and dangerous points
Before moving the equipment, first determine the moving range and dangerous points to reduce the risk of misoperation.
Ensure the stability of mobile devices
Before moving the equipment, make sure that the foundation of the machine and the mobile equipment are stable. At this time, the supporting parts of the equipment in the process can be adjusted, and anti-skid measures can be taken.
Ensure the stability of the work surface.
The premise of mobile equipment is to ensure the stability of the workbench. Therefore, before moving the equipment, it is necessary to check whether the workbench is stable to avoid instability.
Ensure the site and equipment are unobstructed.
Depending on the operation of the mobile device, there may be various types of baffles. Therefore, it is necessary to ensure that the site and equipment are unobstructed before operation, so as to facilitate the resistance free movement of the machine.
Operation process
The operation process of equipment shifting needs to follow the following steps:
Equipment inspection
Before moving the device, you need to check the device to see if there is any fault. Especially some key parts need to be inspected.
Installing protective devices
When moving equipment, protective measures shall be installed to avoid equipment damage due to misoperation.
Mark the moving equipment
When moving a device, you need to mark the start point and end point of the device, and change the mark in time after moving.
Mobile Devices
When moving the equipment, be careful. The device needs target maintenance according to the equipment characteristics and relevant technical data.
Equipment inspection
Equipment inspection is the key link of mobile equipment operation. If the equipment inspection is not in place, accidents may occur during the movement, causing personal injury or equipment damage. Therefore, attention should be paid to the following aspects in equipment inspection:
Stability of the machine
The stability of mobile devices is the most critical link in operation. Therefore, before moving, it is necessary to check the stability of the machine to ensure that the machine will not tilt or bump when moving.
Whether there is damage
Before moving, check all parts of the equipment to determine whether there is damage or wear. If damage or wear is found, it shall be repaired or replaced in time.
Condition of moving direction of equipment
Before moving the device, you need to consider the moving direction of the device. For complex equipment movement, an operation plan should be made in advance.
Site environment
The on-site environment of equipment movement is also very important. Before moving the equipment, it is necessary to check the site environment to ensure that it is clean and tidy, and there are no factors threatening the equipment.
Although the operation of equipment shifting seems simple, it involves many points. During the operation, special attention should be paid to the safety of equipment movement, the operation process should be followed, the equipment should be inspected and maintained, and records and sorting should also be made after the operation. Follow these precautions to ensure the success of equipment shifting operation and personal safety of everyone.
