The concept of truck crane is to combine the truck with the crane, which can drive on its own without assembly and can work directly. The equipment hoisting itself is a high-risk operation, which should be strictly installed in scientific and reasonable steps to protect the machine and personal safety, Huai'an Crane Rental Xinyu Dajian will take you to understand the safe operation rules of truck crane, and hope it can help you!

（1） The truck crane driver must receive professional technical training and pass the examination before he can get on the truck and operate independently.

（2） The driver shall be familiar with the mechanical principle, maintenance rules and safety operation rules of the truck crane, and shall strictly implement them. It is forbidden to operate after drinking or when the body is not suitable.

（3） Before use, carefully check whether the operation site is flat and solid, whether the outrigger is firm, and whether the operating handle, brake and other operating devices are sensitive and reliable. Start work after confirming that there is no abnormality.

（4） When lifting the hook, the workpiece must be lifted in the direction of the rear of the vehicle. When lifting, the trial lifting must be carried out first to avoid lifting too high, to minimize the stay time of the object in the air, and to slow and even the speed of the lifted object when it rises and falls.

（5） During operation, the wear of steel wire rope shall be observed frequently. When the elevation angle of the boom is large, the lifting object shall be lowered to the parking position first, and the boom shall be lowered, the rope loosened, and the hook removed while keeping the tension of the sling.

（6） When the boom is lifted, lowered and rotated, it must be ensured that the boom is not lowered when lifting heavy objects. The accelerator shall be small when lowering the arm, and large when lifting the arm. The slewing action shall be stable without sudden reversal. When the load is close to the rated weight, it shall not swing in the air above 0.5m above the ground.

（7） It is strictly prohibited to lift and drive. When driving, the boom must be placed on the bracket, the hook must be on the hook of the bumper, and the wire rope must be tightened.

（8） After the work is completed, the leg lifting and slewing arm shall not be carried out at the same time. When driving on the highway, strictly abide by the traffic rules, turn slowly, strictly control the speed when going downhill, and do not coast in neutral.