super high Equipment hoisting business Do you understand the precautions of? Huai'an Xinyu Big Piece will let you know!

1、 Pay attention to the placement position.

In order to facilitate transportation, some lifting companies will push over the superelevation equipment, if the equipment allows, of course. However, most industrial equipment is not allowed to be placed upside down or sideways.

2、 Pay attention to binding.

After superelevation equipment is placed on the flatbed truck, it shall be bound. It is not only necessary to bind the side, but also to place the equipment to move during transportation. Special attention should be paid to the binding of the upper and lower sides and the side. The side tension should be applied to the equipment to prevent the superelevation equipment from turning over.

3、 Pay attention to the road height limit.

In many areas of China, Class I highways, Class II highways and expressways are limited in height. In some rural roads, the height limit is only about three or four meters. After the equipment is loaded, it is necessary to measure the height from the ground to the highest point of the equipment. Reasonably plan the transportation route to avoid equipment collision caused by not paying attention to the height limit plate.

4、 Pay attention to turning.

Because the transportation is superelevation equipment, when the transportation vehicle turns, it is necessary to keep busy speed and pay attention to the front, rear, left and right environment to avoid too fast speed and traffic accidents due to the principle of sight blocking.

In a word, for the production equipment of hoisting and transportation, it is still necessary to find an experienced large equipment handling company.