today, Huai'an Crane Rental Company Summarize common lifting methods for everyone:

1. Symmetrical lifting method: It is applicable to the industrial workshop in the production workshop and other places where self-propelled lifting equipment cannot be used for lifting.

2. Load lifting method: The key is the towering machinery equipment or structure with high height to width ratio, such as tower machinery equipment, torch tower body, TV transmission tower, bow, chimney, advertising tower body, etc. in chemical enterprises.

3. Basic concept of rotating lifting method: It is to basically connect the bottom of the machine equipment or prefabricated components with the rotating door hinge, and use lifting equipment to rotate the machine equipment or prefabricated components around the door hinge to achieve standing.

The key of the herringbone bow turning method is the very tall and heavy tower structures; The key to the lifting and rotating method of hydraulic braking system is the vertical transportation and column installation of machinery and equipment, which is suitable for some places where the lifting room space is very small or there is no lifting room at all, such as the villa basement; The rotating method of push lifting without anchor point is actually an expanded application of the "herringbone bow pulling and erecting rotating method". The application site is very narrow, and it is impossible to arrange the cable wind rope. In addition, the machine equipment itself has a certain bending stiffness, such as the lifting of large and medium-sized towers, torches and prefabricated components in petrochemical plants.

4、 Huai'an equipment displacement Lifting method of crane super high inclined bearing cable for factory tutors: Applicable to super Overhead hoisting Small and medium-sized machines, cableways to poor areas

Some customers often ask about cranes, and sometimes some customers must use crawler cranes. For example, some customers require crawler cranes for foundation piling on construction sites. What are the differences and characteristics between the chain rail belt and the crane? Crane rental The crane is also called tire crane. The key is the combination of the car cab and the lifting operation. This is an evolution of the crawler crane [crawler crane], which transforms part of the walking chain rails and the walking support frame into the car chassis of the tires, and gets rid of the damage to the ground caused by the crawler shoes.

Compared with crawler crane, it is more suitable for general equipment hoisting due to the application of tire walking, and it does not need to use support feet.

Naturally, because there is no need to lift with support legs and there are often some safety accidents when travelling with lifting loads, the speed of travelling is also faster than that of crawler cranes (crawler cranes); Stable operation, heavy lifting, lifting and walking within a special range, but ensure that the road surface is leveled and firm, the tire pressure standard meets the requirements, and the lifting distance from the road surface cannot exceed 50cm; It is forbidden to walk long distance with load. In order to ensure the safety of work, it is strictly prohibited to carry out hoisting without supporting feet in most parts of China at this stage. The types of galvanized steel wire ropes used for the supporting facilities of the large-scale hoisting machinery rental hoisting equipment include phosphating galvanized steel wire ropes, galvanized steel wire ropes and bright galvanized steel wire ropes.