Loading and unloading vehicles can only be carried out on firm and level roads. Maintain a safe distance from the edge of the road or cliff. It is not necessary to load and unload equipment with equipment in work. There is a risk of equipment falling or overturning. The starting point and springboard with sufficient compressive strength must be applied. Ensure that the total width, length and thickness of the starting point and springboard can show a safe loading and unloading gradient.
When on the starting point and springboard, it is not necessary to actually operate all operating handles except the walking operating handle. It is not necessary to adjust the orientation on the starting point and springboard. If necessary, drive the equipment out of the starting point and springboard, adjust the orientation, and then drive to the starting point and springboard. At the connection position between the starting point, the springboard and the trolley, the center of gravity of the equipment will suddenly change, and there is a risk that the equipment will lose its balance. When turning over this position, walk slowly.
If the equipment is used or unloaded on the dam foundation or service platform, it shall be ensured that it has suitable overall width, compressive strength and inclination. For example, when rotating the upper end of the service platform on the trolley, the trolley is not stable, so it is necessary to take back the working equipment and rotate gradually.
For equipment equipped with a car cab, the car door shall be locked after being installed into the car. Otherwise, during the whole process of transportation, the car door will suddenly open. When transporting equipment with a trailer, there is a risk of accidental injury or death during the whole process of transportation. The following steps should be followed:
Crane rental company The equipment specifications must be carefully checked. According to the equipment installed in the work, the net weight of the equipment, the ratio of height to width for transportation, and the total length will be very different. Check in advance whether all highway bridges and other parts of the transportation line have sufficient compressive strength to bear the total weight of the trailer and the equipment transported. The equipment can be divided into several parts for transportation, so please contact Crane rental company Contact and carry out various tasks.
