Huai'an crane rental Due to the aging of materials, processes, components and artificial elements, various problems will inevitably occur in the application of construction machinery leasing. If we can correctly analyze the causes of various problems, take effective and targeted preventive measures and try to slow down the damage of mechanical parts, we can effectively avoid mechanical problems and extend the service life of machinery. next, Huai'an Crane Leasing Company Tell you five tips for prolonging the service life of cranes!

1. Ensure normal working load of crane

The size and nature of crane working load has an important impact on the mechanical loss process. Generally speaking, the wear of parts increases proportionally with the increase of load. When the load borne by the part is higher than the average design load, its wear will intensify.

2. Reduce various corrosion effects of crane

Corrosion refers to the phenomenon that the metal surface is damaged due to chemical or electrochemical interaction with surrounding media. This corrosion will not only affect the normal operation of the external equipment of the crane, but also corrode the internal parts of the machine. For example, rainwater, chemicals in the air, etc. enter the interior of the machine through the external channels and gaps of mechanical parts, corrode the interior of mechanical parts, accelerate mechanical wear, and increase mechanical failures.

3. Reduce the impact of crane impurities

The crane impurities generally refer to non-metallic substances such as dust, soil, and some metal chips and wear products produced by construction machinery during use. Once these impurities enter the interior of the machine and reach between the mating surfaces of the machine, their harm is great. They not only block the relative movement out, accelerate the wear of parts, but also scratch the mating surfaces, damage the lubricating oil film, raise the temperature of parts and deteriorate the lubricating oil.

4. Reduce the impact of temperature

The temperature of each component has its own normal range. For example, the temperature of the general cooling water is 80-90 ℃, and the temperature of the hydraulic oil of the hydraulic transmission system is 30-60 ℃. If the temperature is lower than or higher than this range, the wear of the parts will be accelerated, the lubricating oil will deteriorate, and the material performance will change.

5. Timely maintenance

Various failures will inevitably occur in the use of machinery. Among these faults, some of them may have little impact on mechanical equipment, and some of them are relatively serious, even leading to major accidents of machine destruction and human death. It is necessary to deal with the problem in a timely manner, so as not to delay the maintenance opportunity due to small faults that do not affect the use, resulting in more serious faults.

The above is the relevant information introduced to you by Huai'an Xinyu Heavy Lift Co., Ltd., and we hope it will be helpful to you. If you want to know more about the relevant issues, you can directly contact the customer service company, and we will serve you wholeheartedly!