today Huai'an Crane Rental Company What are the safety controls during the hoisting of small cranes!

1. Check whether the construction operation, command and technical personnel are in place, whether the division of labor is clear, and whether the lifting environment (weather, wind, etc.) meets the requirements.

2. Check whether the instrument interface and tension flange of the equipment or components are protected, and avoid or handle the sharp parts between the lifting sling and the equipment or components.

3. The lifting point of the equipment and the first level steel wire rope shall be firmly combined and confirmed. If small crane The lifting points shall be arranged reasonably.

4. Urge the construction party to conduct self inspection and re inspection on the safety conditions before hoisting, and conduct joint inspection with the construction party. All inspectors shall sign for confirmation, and the trial lifting can be carried out only after the safety inspection and confirmation of all lifting functional personnel.

5. During test hoisting, carefully check and confirm the balance of equipment components, stable combination of rigging, small crane Load, lifting lugs of equipment or components, replacement of rigging, small crane , load, lifting lug foundation and body, and equipment or components. The formal lifting can be carried out only after all the test lifting conditions are confirmed to be qualified.

6、 Huai'an equipment displacement During the hoisting process, all management, command and operation personnel shall strictly perform their responsibilities and cooperate closely. The safety management engineer implements the parallel management of the whole process.

7. When two or more small crane In case of joint operation, crane And small crane The lifting and tail sliding speed of shall be supervised by the construction company to send special personnel to command properly.