1 In case of fire at the lifting operation site, HG 23011 shall be followed. The lifting rope, wind rope and traction rope shall not touch the wires and keep a safe distance.

2 In addition to this standard, the operating procedures of stereotyped lifting machines shall also be followed when using stereotyped lifting machines (crawler cranes, wheel cranes, bridge cranes, etc.).

3 When lifting, the lifting must be carried out according to the specified load. Lifting gear and ropes must be selected and used by calculation. Overload operation is strictly prohibited. When the lifting weight is close to or reaches the rated lifting capacity, the brake shall be checked, and the brake shall be lifted smoothly after the trial installation and lifting of low height and short stroke.

4 It is forbidden to stand, pass and work under suspended loads.

5 During hoisting operation, hoisting is not allowed under any of the following circumstances:

A. The command signal is not clear;

B. Overload or unknown weight;

C. Cable stayed weight;

D. Heavy objects with insufficient light and difficult access;

E. People getting off the train;

F. Buried weight;

G. The weight is not fastened, the rope is knotted, and the rope is uneven.

H. There is no padding for edge objects.

1. Heavy things are beyond the human mind;

J. Safety device failure.

6 It is forbidden to change or borrow the lifting safety operation certificate according to the content of the lifting safety operation certificate, change the work content, expand the work scope or transfer the work part.

7 If the approval procedure for lifting operation is incomplete, safety measures are not implemented and the working environment does not meet the safety requirements, the operator has the right to refuse to operate.

Above by Huai'an crane rental Provided by the manufacturer