Xinyu large piece Huai'an Crane Rental Company Explain to you Crane rental How to avoid the side pulling accident of equipment hoisting in:

In midair, the lifting equipment, trolley and crane are all subjected to lateral loads that may cause damage. Increasing the transverse load of the wire rope will separate the sensitive wire rope guide rail, make the wire rope pass through the barrel groove, and even make the wire rope get rid of the mobile pulley. This condition may cause damage to the wire rope, resulting in reduced load. In addition, top mounting may lead to premature or immediate failure of other important parts of bucket elevator and trolley. Tianjin Crane Rental will introduce how to deal with side pulling accidents in detail:

How to avoid side pulling accidents of hoisting equipment in crane leasing?

1. Management, learning and training of practical operators.

The best way to prevent this is to give all operators and fasteners adequate training in the actual operation of the machine. Operators who have been properly trained and supervised are unlikely to perform such operations, because they have received appropriate operation training and are aware of the risks and risks of side pulling.

2. Safety design scheme to reduce the probability of side tension.

The operating enterprise must solve the problem that when the load is close to people in a narrow indoor space, the use value of the selected load is very high, or when all can be measured specifically and accurately, it will be used to help the lifting equipment and lifting equipment to carry out appropriate practical operation. The existence of technology can easily limit the implementation of excessive side pulling or side loading.

3. Limitations of mechanical equipment.

When the mechanical pole senses the transverse load in one direction or another, Tianjin Crane Leasing recommends that many industries can install limit switch poles to stop the elevator or temporarily reverse the direction and move. The other way is to use the limit switch box of mechanical equipment to connect the limit switch rod to the raised wire rope. In actual operation, the limit position in the box will be opened outside the allowed vertical axis, so as to terminate the bucket elevator and/or mobile fitness exercise. These two mechanical devices occupy some internal space, resulting in the reduction of the width height ratio of the hook and the rise of additional electrical components. If there is any abnormality, routine medical inspection and repair are required. This method is very sensitive and can damage the heave application and operator misuse.

The above is Xinyu Big Piece Huai'an equipment displacement I hope the relevant information brought by the company will be helpful to you.